Application Charts
OTR Tire Radial Patches

HOW TO USE THESE CHARTS. Please note that these charts are only a suggestion and local driving conditions, etc. should be considered when making the proper selection of Chemco radial patches.

Determine the tire cross section corresponding to the injured tire. This will determine the appropriate patch selection. The chart then provides information outlining the maximum dimensions of the repairable injury. The maximum length of a repair is determined by its corresponding width. As the width of the injury increases, the maximum length decreases. The chart also indicates the minimum distance a crown patch must extend beyond the injury, or a sidewall patch must extend beyond the flex point of the sidewall onto the tire crown. Please refer to the diagrams below.

 

Crown Repairs

Sidewall Repairs

Note: The crown patch must not extend beyond the belt edge into the sidewall flex region. However, it must extend beyond the edge of the injury by the minimum distance (M). If not, a sidewall patch must be used.
Note: The sidewall patch should extend from the bead to the center of the crown area. It is recommended that the patch be placed to end 3/8" to 1 ½” (9.5mm to 38mm) above the bead. The sidewall patch must extend beyond the edge of the injury by the minimum distance (M). On shoulder or lower sidewall repairs, the patch must be placed to meet the minimum distance (M). The maximum length of the repair is determined by its corresponding width. As the width of an injury increases, the maximum length decreases (please refer to the accompanying size charts).
Crown Repairs
Crown Injury

Tire Cross Section

Diameter c 14.00-16.00 17.5-23.5 24.00-29.5 30.00-33.5 36.00-50.5
Inch (mm)          
3/8" (10) SFUX105 SFUX108 SFUX108 SFUX1210 SFUX1210
3/4" (20) SFUX105 SFUX108 SFUX108 SFUX1210 SFUX1412
1" (25) SFUX105 SFUX108 SFUX108 SFUX1210 SFUX1412
11/2" (40) SFUX108 SFUX108 SFUX1210 SFUX1210 SFUX1412
2" (50) SFUX108 SFUX1210 SFUX1210 SFUX1412 SFUX1614
21/2" (65) SFUX108 SFUX1210 SFUX1210 SFUX1412 SFUX1614
31/2" (90) SFUX108 SFUX1210 SFUX1412 SFUX1412 SFUX1614
4"(100)   SFUX1210 SFUX1412 SFUX1614 SFUX1816
5" (125)     SFUX1412 SFUX1614 SFUX1816
61/2" (165)         SFUX1816
Min. Distance 4" (100) 5" (125) 51/2" (140) 6" (152) 61/2" (165)
M Inch (mm)          
     
Sidewall Repairs

Shoulder Injury

Sidewall Injury

                           Tire Cross Section
Diameter c W L 14.00-16.00 17.5-23.5 24.00-29.5 30.00-33.5 36.00-50.5
Inch (mm) Inch (mm) Inch (mm)          
  3/8" (10) 3" (75) SFUX175 SFUX175 SFUX188 SFUX207 SFUX238
  3/8" (10) 51/2" (140) SFUX175 SFUX188 SFUX207 SFUX238 SFUX269
  3/4" (20) 2" (50) SFUX175 SFUX188 SFUX188 SFUX207 SFUX238
  3/4" (20) 5" (125) SFUX175 SFUX188 SFUX207 SFUX238 SFUX269
  3/4" (20) 8" (200) SFUX188 SFUX207 SFUX238 SFUX269 SFUX269
3/4" (20)     SFUX175 SFUX188 SFUX188 SFUX207 SFUX238
  1" (25) 4" (100) SFUX175 SFUX188 SFUX207 SFUX238 SFUX269
  1" (25) 8" (200) SFUX188 SFUX207 SFUX238 SFUX269 SFUX269
1"(25)     SFUX188 SFUX188 SFUX207 SFUX207 SFUX238
  11/2" (38) 31/2" (90) SFUX188 SFUX188 SFUX207 SFUX207 SFUX238
  11/2" (38) 10" (250) SFUX207 SFUX207 SFUX238 SFUX238 SFUX269
11/2" (40)     SFUX188 SFUX188 SFUX207 SFUX238 SFUX238
  15/8" (40) 3" (75) SFUX175 SFUX188 SFUX207 SFUX238 SFUX238
  13/4" (45) 61/2" (165) SFUX188 SFUX207 SFUX238 SFUX238 SFUX269
  13/4" (45) 10" (250) SFUX207 SFUX238 SFUX238 SFUX269 SFUX3010
  2" (50) 8" (200) SFUX207 SFUX238 SFUX269 SFUX269 SFUX3010
  2" (50) 9" (230) SFUX207 SFUX207 SFUX238 SFUX269 SFUX3010
  2" (50) 10" (250) SFUX207 SFUX207 SFUX238 SFUX269 SFUX3010
  2" (50) 12" (300) SFUX207 SFUX238 SFUX238 SFUX269 SFUX3010
  2" (50) 13" (330) SFUX238 SFUX238 SFUX269 SFUX3010 SFUX3411
  2" (50) 14" (350) SFUX238